Chevrolet C/K First Generation (1960-1966)

The 1960 model year introduced a new body style of light pick-up truck that featured many firsts. Most important of these were a drop-center ladder frame, allowing the cab to sit lower, and independent front suspension, giving an almost car-like ride in a truck. Also new for 1960 was a new designation system for trucks made by GM. Gone was the 3100, 3200, and 3600 designations for short 1/2, long 1/2 and 3/4-ton models. Instead, a new scheme would assign a 10, 20, or 30 for 1/2, 3/4, and 1-ton models. Since 1957, trucks were available from the factory as 4-wheel drive, and the new class scheme would make this known, a C (Conventional) in front of the series number would indicate 2-wheel rear drive, a K would denote 4-wheel drive. Actual badging on trucks still carried the series name system from the previous generation. The 10, 20, and 30 series (C or K) were badged as "Apache 10", etc., 40, 50, and 60 series trucks were badged as "Viking 40", and the largest 70, 80, and 90 series models were marked "Spartan 70" etc. in 1960, C/K trucks were available in smooth "Fleetside" or fendered "Stepside" versions. GMC called these "Wideside" and "Fenderside." Half-ton models were the C10 and K10 short-bed trucks, and C15 and K15 long-bed trucks. The 3/4-ton C20 and K20, as well as the one-ton C30, were also available. GMC did not use the "C" nomenclature, though their 4x4 versions had the "K" designation. The 1962 model used torsion bar front suspension, with trailing arm suspension rear. Trim lines were base and "Custom." Engines included the base GMC 305 in³ V6 for the GMC version, 135 hp (101 kW) 236 in³ (3.9 L) and 150 hp (112 kW) 261 in³ (4.3 L) straight-6s, and a 283 in³ (4.6 L) V8 with 185 hp (119 kW).

A coil-spring front suspension came in 1963; along with a new base engine, a 140 hp (104 kW) 230 in³ (3.8 L) I6, and an optional 165 hp (123 kW) 292 in³ (4.8 L) I6. The cab was changed for 1964, with elimination of the "wraparound" windshield and a new front grille design, along with various interior changes. Air conditioning and a 220 hp (164 kW) 327 in³ (5.4 L) V8 came in 1965. A new base engine finished the model in 1966 with a 155 hp (116 kW) 250 in³ (4.1 L) I6.

History of Alfa Romeo 8C

In 1924, Vittorio Jano created his first straight eight cylinder engine for Alfa Romeo, the 1987 cc P2, with common crankcase and four plated steel two cylinder blocks, which won the first World Championship ever in 1925. Albeit it was a straight-8, the 8C designation was not used.

The 8C engine, first entered at the 1931 Mille Miglia road race through Italy,[2] had a common crankcase, now with two alloy four cylinder blocks, which also incorporated the heads. The bore and stroke (and hence rods, pistons and the like), were the same as the 6C 1750. There was no separate head, and no head gasket to fail, but this made valve maintenance more difficult. A central gear tower drove the overhead camshafts, superchargers and ancillaries. As far as production cars are concerned, the 8C engine powered two models, the 8C 2300 (1931–1935) and the even more rare and expensive 8C2900 (1936–1941).

At the same time, since racing cars were no longer required to carry a mechanic, Alfa Romeo built the first single seater race car. As a first attempt, the 1931 Monoposto Tipo A used a pair of 6 cylinder engines fitted side-by-side in the chassis.[3] As the resulting car was too heavy and complex, Jano designed a more suitable and successful racer called Monoposto Tipo B (aka P3) for the 1932 Grand Prix season. The Tipo B proved itself the winning car of its era, winning straight from its first outing at the 1932 Italian Grand Prix, and was powered with an enlarged version of the 8C engine now at 2665 cc, fed through a pair of superchargers instead of a single one.

Initially, Alfa Romeo announced that the 8C was not to be sold to private owners, but by autumn 1931 Alfa sold it as a rolling chassis in Lungo (long) or Corto (short) form with prices starting at over £1000. The chassis were fitted with bodies from a selection of Italian coach-builders (Carrozzeria) such as Zagato, Carrozzeria Touring, Carrozzeria Castagna, Pininfarina and Brianza, even though Alfa Romeo did make bodies. Some chassis were clothed by coach-builders such as Graber, Worblaufen and Tuscher of Switzerland and Figoni of France. Alfa Romeo also had a practice of rebodying cars for clients, and some racing vehicles were sold rebodied as road vehicles. Some of the famous first owners include Baroness Maud Thyssen of the Thyssen family, the owner of the aircraft and now scooter company Piaggio Andrea Piaggio, Raymond Sommer and Tazio Nuvolari.

History Jeeps Willys MB

During World War I there were limited attempts to mechanize military forces. The US Army had already used 4x4 trucks supplied by the Four Wheel Drive Auto Co. (FWD). By the time of World War II, the United States Department of War was still seeking a light, cross-country reconnaissance vehicle.

As tensions were heightening around the world in the late 1930s, the US Army asked American automobile manufacturers to tender suggestions to replace its existing, aging light motor vehicles, mostly motorcycles and sidecars but also some Ford Model T's.[1][2] This resulted in several prototypes being presented to army officials, such as five Marmon-Herrington 4x4 Fords in 1937, and three Austin roadsters by American Bantam in 1938 (Fowler, 1993). However, the US Army's requirements were not formalized until July 11, 1940, when 135 U.S. automotive manufacturers were approached to submit a design conforming to the army's specifications for a vehicle the World War II training manual TM 9-803 described as "... a general purpose, personnel, or cargo carrier especially adaptable for reconnaissance or command, and designated as 1/4-ton 4x4 Truck."

By now the war was underway in Europe, so the Army's need was urgent and demanding. Bids were to be received by July 22 (after just eleven days). Manufacturers were given 49 days to submit their first prototype and 75 days for completion of 70 test vehicles. The Army's Ordnance Technical Committee specifications were equally demanding: the vehicle would be four-wheel drive, have a crew of three on a wheelbase of no more than 75 (later 80) inches and tracks no more than 47 inches, feature a fold-down windshield, 660 lb payload and be powered by an engine capable of 85 ft·lbf (115 N·m) of torque. The most daunting demand, however, was an empty weight of no more than 1300 lb (590 kg).

Only three companies entered: American Bantam Car Company, Ford Motor Company and Willys-Overland Motors. Though Willys-Overland was the low bidder, Bantam received the bid, being the only company committing to deliver a pilot model in 49 days and production examples in 75. Under the leadership of designer Karl Probst, Bantam built their first prototype, dubbed the "Blitz Buggy" (and in retrospect "Old Number One"), and delivered it to the Army vehicle test center at Camp Holabird, Maryland on September 23, 1940. This presented Army officials with the first of what would eventually evolve into the World War II US Army Jeeps: the Willys MB and Ford GPW.

Since Bantam did not have the production capacity or fiscal stability to deliver on the scale needed by the War Department, the other two bidders, Ford and Willys, were encouraged to complete their own pilot models for testing. The contract for the new reconnaissance car was to be determined by trials. As testing of the Bantam prototype took place from September 27 to October 16, Ford and Willys technical representatives present at Holabird were given ample opportunity to study the vehicle's performance. Moreover, in order to expedite production, the War Department forwarded the Bantam blueprints to Ford and Willys, claiming the government owned the design. Bantam did not dispute this move due to its precarious financial situation. By November 1940 Ford and Willys each submitted prototypes to compete with the Bantam in the Army's trials. The pilot models, the Willys Quad and the Ford Pygmy, turned out very similar to each other and were joined in testing by Bantam's entry, now evolved into a Mark II called the BRC 60. By then the US and its armed forces were already under such pressure that all three cars were declared acceptable and orders for 1500 units per company were given for field testing. At this time it was acknowledged the original weight limit (which Bantam had ignored) was unrealistic, and it was raised to 2160 lb (980 kg).

For these respective pre-production runs, each vehicle received revisions and a new name. Bantam's became the BRC 40, and the company ceased motor vehicle production after the last one was built in December 1941. After losing 240 pounds of weight, Willys' changed the designation to "MA" for "Military" model "A". The Fords went into production as "GP", with "G" for a "Government" type contract and "P" commonly used by Ford to designate any passenger car with a wheelbase of 80 inches.[3]

By July 1941, the War Department desired to standardize and decided to select a single manufacturer to supply them with the next order for another 16,000 vehicles. Willys won the contract mostly due to its more powerful engine (the "Go Devil") which soldiers raved about, and its lower cost and silhouette. Whatever better design features the Bantam and Ford entries had were then incorporated into the Willys car, moving it from an "A" designation to "B", thus the "MB" nomenclature.

By October 1941, it became apparent Willys-Overland could not keep up with production demand and Ford was contracted to produce them as well. The Ford car was then designated GPW, with the "W" referring to the "Willys" licensed design. During World War II, Willys produced 363,000 Jeeps and Ford some 280,000. Approximately 51,000 were exported to the USSR under the Lend-Lease program.

A further 13,000 (roughly) amphibian jeeps were built by Ford under the name GPA (nicknamed 'Seep' for Sea Jeep). Inspired by the larger DUKW, the vehicle was produced too quickly and proved to be too heavy, too unwieldy, and of insufficient freeboard. In spite of participating successfully in the Sicily landings (July 1943) most GPAs were routed to the USSR under the Lend-Lease program. The Soviets were sufficiently pleased with its ability to cross rivers to develop their own version of it after the war.

Holden Monaro HT

n early 1969 the Monaro range was awarded Wheels magazine's Car of the Year for 1968. The model then continued through two minor facelifts, with firstly the HT Monaro range released in 1969 followed by the HG Monaro in 1970. With the HT Monaro, 'GTS 327' became 'GTS 350' following the replacement of the Chevrolet 327ci (5.4 L) V8 by the 300 bhp (224 kW) Chevrolet 350ci (5.7 L) V8.There was also an automatic version of the 'GTS 350' introduced which used a lower power version of the 350ci (5.7 L) engine coupled to a 2-speed Powerglide transmission. HT Monaro also marked the phasing out of the 5.0 litre Chevrolet V8 and the introduction of two locally made V8 engines, the 253 ci (4.2 L) and 308 ci (5.0 L). Just prior to introduction of the HG range, Holden made available as an option - except with the Monaro 'GTS 350' - a new locally-produced 3-speed automatic transmission, called the Trimatic.

The HT and HG models of the Monaro can be distinguished from the HK by the adoption of plastic grilles (previously metal), a round speedometer instead of "strip" style allowing for bringing the tachometer into the main instrument cluster instead of on the floor console, rubber front suspension bushes instead of the HK's sintered bronze, and larger taillights where the turn indicators also wrapped around the now slightly undercut edges. Bodywork 'go-faster' stripe designs (delete options) varied for each series; HK stripes were offset to the driver's side of the bonnet (hood) and bootlid (trunk), the HT had two broad stripes down the centre of the car, and the HG had subtle "sidewinder" stripes running along the top edge of the fenders, under the windows and finishing just before the rear pillar. HT and HG models also had twin air scoops / vents incorporated into their bonnet, which served no real purpose in delivering air into the engine bay.

Holden Barina First generation (MB, ML; 1985–1988)

The first generation MB Barina was launched in 1985 as a badge-engineered Suzuki Cultus as a five-door hatchback. In the first year of production a Road Runner special model was offered complete with decals showing the Warner Bros. cartoon character. A high-profile marketing campaign featured the slogan Beep beep Barina, a catchphrase that remains in the consciousness of many Australians in the present. The mildy facelifted ML Barina was released in September 1986.

In the Used Car Safety Ratings undertaken by the Monash University Accident Research Centre, published in 2008, found that the first generation Barina provides a "significantly worse than average" level of occupant safety protection in the event of an accident.[1] Achieving up to 19km/l on the 1.0 3-cyl models, the fuel consumption on this model is outstanding.

In New Zealand, from 1986 to 1989, a Holden Barina GTi model was also sold, being a rebadged Suzuki Swift Gti (see Suzuki Cultus - Generation 1). This vehicle used the G13B engine.

Mitsubishi Lancer Second generation

In 1979, the Lancer EX was unveiled in Japan. Two engines were only offered back then, a 1.4 L MCA-JET equipped engine paired with Mitsubishi's Silent Shaft Technology, which generated 80 hp (60 kW) and a 1.6 L engine that generated 85 hp (63 kW) and 100 hp (75 kW). The MCA-JET system was something new than the used carburetor system. The MCA stands for Mitsubishi Clean Air which meant that the EX passes both Japan and US emission standards whilst the new cylinder head design of the engine gave way for a third or Jet valve that introduces an extra swirl of air to the combustion chamber swirling the fuel-air mixture for a cleaner, efficient and thorough burn. Another new breakthrough in the Lancer is the Silent Shaft Technology which is actually two counterbalancing shafts that rotate in opposite directions, cancelling the power pulses a normal 4 cylinder engine would be inherent back then, reducing engine noise and vibration providing a smoother ride. The 1.8 L Sirius 80 engines was then introduced in the Lancer in 1980, along with a new 70 hp (52 kW), 1.2 L engine a year after providing a wider choice of engines for the Lancer. Also, a turbocharged, 135 PS (99 kW; 133 hp) engine was added in 1980 for a sportier performance and an Intercooler system was integrated in the existing turbocharged engine to produce 165 PS (121 kW; 163 hp) in 1983.

Mini Clubman and 1275GT: 1969–1980

In 1969, under the ownership of British Leyland, the Mini was given a facelift by stylist Roy Haynes, who had previously worked for Ford. The restyled version was called the Mini Clubman, and has a squarer frontal look, using the same indicator/sidelight assembly as the Austin Maxi. The Mini Clubman was intended to replace the upmarket Riley and Wolseley versions. A new model, dubbed the 1275GT, was slated as the replacement for the 998 cc Mini Cooper (the 1275 cc Mini Cooper S continued alongside the 1275GT for two years until 1971). The Clubman Estate took over where the Countryman and Traveller left off.

Production of the Clubman and 1275GT got off to a slow start because the cars incorporated "lots of production changes" including the relocation of tooling from the manufacturer's Cowley plant to the Longbridge plant: very few cars were handed over to customers before the early months of 1970.[35]

Early domestic market Clubmans were still delivered on cross-ply tyres despite the fact that by 1970 radials had become the norm for the car's mainstream competitors.[35] By 1973 new Minis were, by default, being shipped with radial tyres, though cross-plies could be specified by special order, giving British buyers a price saving of £8.[36]

The 1275GT is often incorrectly described as the "Mini Clubman 1275GT". The official name was always just the "Mini 1275GT", and it was a separate, distinct model from the Clubman (albeit, it shared the same frontal treatment as the Mini Clubman, and was launched at the same time).

In 1971, the 1275 cc Mini Cooper S was discontinued in the UK, leaving the Mini 1275GT as the only sporting Mini on sale for the rest of the decade. Innocenti in Italy, however, continued making their own version of the Mini Cooper for some time. While the UK built 1275GT was not nearly as quick as a 1275 Mini Cooper S, it was cheaper to buy, run, and insure. It was the first Mini to be equipped with a tachometer. It also featured a standard-fit close-ratio gearbox. Performance of the 1275GT was lively for the time, achieving 0–60 mph (97 km/h) in 12.9 seconds, and the excellent midrange torque offered a 30–50 mph (48–80 km/h) time in top gear of only nine seconds. The bluff front, however, meant that the model struggled to reach 90 mph (140 km/h). The 1275 cc A-series engine could be cheaply and easily tuned, though the cheap purchase price and prominent "sidewinder" door stripes meant that this model developed a reputation as something of a "boy-racer special" during the 1970s and into the 1980s.

The Mini Clubman and 1275GT were responsible for two motoring "firsts": they were the first vehicles to use a flexi printed-circuit board behind the dash instruments (universal nowadays, but technically advanced for 1969). Secondly, the 1275GT was the first vehicle to be offered with run-flat tyres; from 1974 this model could be ordered with optional Dunlop Denovo tyres on 12-inch (300 mm) diameter rims. In the event of a puncture, the Dunlop Denovo tyre would not burst and quickly deflate, but could continue to be used safely at speeds of up to 50 mph (80 km/h). This was a useful safety feature, although the increased road noise and relatively poor grip of this tyre meant that many 1275GT buyers ignored this option.

Throughout the 1970s, British Leyland continued to produce the classic 1959 "round-front" design, alongside the newer Clubman and 1275GT models. The long-nose Clubman and 1275GT offered better crash safety, were better equipped, and had vastly better under-bonnet access, but they were more expensive and aerodynamically inferior to the original 1959 design. The Mini Clubman and 1275GT were replaced in 1980 by the new hatchback Austin Metro, while production of the original "round-front" mini design continued for another 20 years. At the end of Clubman and 1275GT production, 275,583 Clubman saloons, 197,606 Clubman Estates and 110,673 1275GTs had been made

Mitsubishi Galant First Generation

The first generation of the car, initially known as the Colt Galant, was released in December 1969. Three models were available, powered by the new 'Saturn' engine in 1.3 (AI model) or 1.5 L (AII and AIII) configurations. A 1.6 L version came the following year. The design was dubbed "Dynawedge" by Mitsubishi, referring to the influence of aerodynamics on the silhouette.[2] Initially only available as a four-door sedan, a two-door hardtop variant was added in 1970, offering the unique stylistic feature of being the first Japanese production passenger car with full side windows and no side pillars. It became Mitsubishi's first car to be sold in the United States in 1971 when the Chrysler Corporation, the company's new partner and stakeholder, began importing the car as the Dodge Colt. It was also sold in Australia alongside the larger Chrysler Valiant models, in four door form as the Chrysler Galant.

From 1970, a fastback coupé model was developed, the Galant GTO. Fashioned after contemporary American muscle cars, the hardtop GTO was available with a choice of three 4G32 'Saturn' engines, and was available until 1975. The nameplate was sufficiently highly regarded in Japan for it to be resurrected for the 1990 Mitsubishi GTO coupé.

A second coupé was introduced in 1971, the Galant FTO. Powered by the 4G41 1.4 L engine, it too would leave a legacy for the company to return to in the 1990s with the Mitsubishi FTO.

Mercedes-Benz 300D

The first Mercedes-Benz 300D automobile (not to be confused with the 300d or 1950s 300D four-door cabriolets) was introduced in 1975 (U.S.) and started its life by placing the newly developed 3.0 litre five-cylinder naturally aspirated diesel engine 617.910 in a W115 chassis four-cylinder Mercedes-Benz 240D diesel. For the American market those cars only came with power windows and automatic transmission.

The W123 chassis of the Mercedes-Benz 300D was introduced as a 1976 model (1977 U.S.). Its 3.0 litre five-cylinder diesel engine with indirect injection (using a Bosch MW for the American market, or W for the rest of the world) piston-type mechanical fuel injection pump, produced 80 to 88 hp (59 to 65 kW), depending on the year or country. This model features an extra 600 cm³ displacement compared to the four-cylinder Mercedes-Benz 240D diesel. The W123 chassis evolution continued with the addition of the 300D Turbo Diesel in 1982 (1981 for station wagon), sporting a 3.0 litre five-cylinder Garrett turbocharged engine which was originally developed in 1978 and first offered in the US market for 300SD models in 1979. This engine developed 118 to 123 hp (88 to 91 kW) and considerably improved the car's performance while still maintaining the superb reliability and efficiency of earlier models. In addition to the sedan (300D) a station wagon (300TD) and coupe (300CD) were also produced. The 300TD also had optional rearward facing third row seat which could fold flat into the floor, which was also seen on Volvo, Saab 95 and Ford Taurus station wagons.

Production of the W123 chassis ended in 1985 but in many countries as many as 75% of the cars originally registered remain on the road today 20 years later, a testament to the quality and durability of the original design. The 300D badge continued on in the W124 chassis family until 1993, but as a completely different design.

The W124 chassis 300D (pre E Class facelift) has the OM603 engine, which is a 3.0 litre six-cylinder turbocharged engine that appeared for one year only, 1987. The Turbo Diesel W124 appeared anew in 1990 until 1993, as the 300D 2.5 Turbo, with the OM602 engine. The latter engine was a 2.5 litre five cylinder turbocharged engine.

Ferrari 166 Inter

The Ferrari 166 Inter was Ferrari's first true grand tourer. An evolution of the 125 S and 166 S racing cars, it was a sports car for the street with coachbuilt bodies. The Inter name commemorated the victories claimed in 166 S models by Scuderia Inter. 37 166 Inters were built from 1948 through 1950. Note that both the 166 S and 166 F2 were also called "166 Inter" in the days that they were actively raced by the Scuderia of the same name.

The 166 Inter shared its Aurelio Lampredi-designed tube frame and double wishbone/live axle suspension and 2420 mm wheelbase with the 125 S and 166 S. It was replaced by the 2.3 L 195 Inter and 2.6 L 212 Inter in 1950 and 1951.

The first Ferrari GT car debuted at the Paris Motor Show on October 6, 1949. It was an elegant coupe designed by Carrozzeria Touring of Milan who had previously created a number of similar Ferrari and Alfa Romeo models. Customer sales soon started, with 166 Inter models becoming the first Ferraris to be purchased for the road rather than the race track. As was typical at the time, a bare chassis was delivered to the coachbuilder of the customer's choice. Many used Touring, but Ghia's one-off Boano coupe was more daring. Others were built by Stabilimenti Farina, who penned a Cisitalia 202-like coupe. Vignale also joined in, presaging their designs of the coming decade, and two cabriolets created by Pinin Farina and Bertone foreshadowed those companies' later involvement with Ferrari.

The 1.5 L Gioacchino Colombo-designed V12 engine from the 166 S remained, as did its chassis, though the wheelbase would eventually grow from 2420 mm (95 in) to 2500 mm (98 in). Output was 110 to 140 hp (82 to 104 kW) at 6,000 rpm with one to three carburettors.

Subaru R-2

The Subaru R-2 was a kei car manufactured by Subaru from 1969-1972. The R-2 was a full model change of the popular Subaru 360, but with an updated appearance and increased interior space. The R-2 appeared approximately one year before the Honda Life, Daihatsu Fellow Max and Suzuki Fronte kei cars, however, it continued to use the powertrain setup from the Subaru 360, which was the EK33 air-cooled 2 cylinder engine installed in the back, which is the inspiration for the name of the vehicle. It appeared around the same time as the second generation Mitsubishi Minica.

When the car was introduced February 8 1969, Subaru took 25,000 orders for the car in one month.

In the early 1970s, the Japanese Government enacted legislation to reduce emissions, which prompted Subaru and other manufacturers to upgrade engines that were air-cooled and using a two-stroke engine implementation. On October 7 1971, the Subaru engine was upgraded to a two-stroke water cooled engine, called the EK34 series engine, but the retrofit was hastily done, and was better achieved with the new 1972 Subaru Rex, which was available with both 2- and 4-doors. A styling upgrade was accomplished on the water-cooled R-2, adding a faux grille to the front of the vehicle that had no function other than a more modern appearance, as well as a corporate identity to the all new compact Subaru Leone.

Subaru continued with a rear engine platform so as to afford more trunk space up front and provide seating for four passengers, whereas competitors offered front engine front wheel drive vehicles to reduce noise intrusion from the engine and offer rear seats that folded down for increased cargo capacity, albeit with fewer passengers. In response to the rising popularity of front wheel drive front engine alternatives, Subaru offered a hatchback bodystyle February 16 1970.

Performance versions of the R-2 came April 18 1970 in the form of the R-2 SS with a dual exhaust and an increase in the compression ratio from 3.8 kg·m (37 N·m; 27 lb·ft)at 6,400 RPM to 7.5 kg·m (74 N·m; 54 lb·ft)at 7,000 RPM, and a higher trim level called the R-2 GL October 5. Another contributor to the early cancellation of the R-2 was its handling characteristics, which were found to be not as stable as vehicles that were front engine, front wheel drive[1].

It's the car driven by Natsumi Tsujimoto, an anime fictional character and the main protagonist in the You're Under Arrest franchise.

Subaru would launch a spiritual successor to the R-2 in 2003, called the Subaru R2.

HONDA Accord First generation (1976–1981)

The first generation Honda Accord was launched in 1976 as a three-door hatchback with 68 hp (51 kW), a 93.7-inch (2,380.0 mm) wheelbase, and a weight of about 2,000 pounds. It was larger than the tiny Honda Civic at 162 inches (4,115 mm) long. The Accord sold well, due to its moderate size and great fuel economy. It was the first Japanese small car with features like cloth seats, a tachometer, intermittent wipers, and an AM/FM radio as standard equipment. In 1978 an LX version of the coupe was added which came with air conditioning, digital clock, and power steering. In 1979 a four-door sedan was added to the lineup, and power went to 72 hp (54 kW) when the 1,599 cc (97.6 cu in)[5] EL1 engine was supplemented and in certain markets replaced by the 1,751 cc (106.9 cu in) EK-1 unit. In 1980 the optional two-speed automatic of previous years became a three-speed automatic. Slightly redesigned bumper trim, new grilles and taillamps, and remote mirrors on the 4-door (chrome) and the LX (black plastic) models. The CVCC badges were deleted. In 1981 an SE model was added for the first time, with novio-leather seats and power windows. Base model hatchbacks received the same smaller black plastic remote mirror that the 4-door, LX, and SE 4-door received at the same time. Instrument cluster revised with mostly pictograms, instead of the worded warning lights and gauge markings. Nivorno Beige (code #Y-39) replaced with Oslo Beige (#YR-43). Dark brown was discontinued, as was the bronze metallic. Shifter redesigned to have a stronger spring to prevent unintentional engagement of reverse, instead of the spring-loaded shift knob of the 1976 through 1980 model cars.

The Accord competed with Japanese competitors Toyota Corona, Nissan Stanza, Mazda Capella, and the Mitsubishi Galant.

TOYOTA SA

The SA was Toyota's first true post war design. It differed from all previous Toyota cars by having a 4 cylinder engine (previously a 6 cylinder was used), 4 wheel independent suspension (previously using rigid axles with leaf springs) and a smaller, aerodynamic body. The project was driven by Kiichiro Toyoda under the wisdom of his father's (Sakichi Toyoda) words, "Stay ahead of the times"[2] but most of the design work was done by Dr Kazuo Kumabe.[3]

The body was aerodynamic in a style similar to the Volkswagen Beetle. Only a two door sedan was made, making it unsuitable for the taxi market. The doors were arranged to open rearwards (often called suicide doors). The front window was a single pane of flat glass with a single wiper mounted above the driver. Only right hand drive was offered.

Toyota engineers (including Dr Kumabe) had visited Germany before World War II and had studied the 16 cylinder Auto Union racing car (independent suspension) and Porsche and Volkswagen designs (independent suspension, aerodynamic bodies, backbone chassis, rear mounted air cooled engines, economical production cost)[4]. Many Japanese companies had ties with Germany during the war years but most partnered with British or American companies after the war and thus used technologies commonly used in Britain or America. But Toyota did not partner with a foreign company, so it was free to use German designs. Many features of the prototype Beetle were subsequently put into the SA, although the Beetle's rear mounted air cooled engine feature was not used. Later on, Toyota revisited the economic principles exemplified by the Beetle when designing the Publica and the Corolla.

Nissan Fairlady Z Third generation (Z31)

The Z-car was completely redesigned in 1984, and introduced Nissan's new series of 3.0-liter V6 engine, dubbed the VG series. The same engine was used in the Electramotive (later to become NPTI) GTP ZX-Turbo that dominated the IMSA GTP races in 1988 and 1989. These were available in both VG30E naturally-aspirated and VG30ET turbocharged forms producing 160 and 200 bhp (120 and 150 kW) respectively, although some VG30ET powered Z-cars exported outside of the US produced 228 bhp (170 kW) due to a longer cam duration and less emission restrictions. These were showcased in sleek new wedge-shaped styling and given a new name, the 300ZX. Like its predecessor, it also proved to be wildly popular and was the second-best selling Z-car in history[3] selling over 70,000 units due in part not only to its new styling but also to even more added luxury features and high performance. When the 300ZX Turbo was released in Japan, it offered the highest HP available in a Japanese standard production car at the time.[4] Much like the 280ZX that preceded it, the first-gen 300ZX was thought by enthusiasts as more GT than true sports car. It had improved handling, acceleration, and refinement on any previous model Z-car.

Nissan made various changes and claimed improvements to the Z31 model through its entire production. In 1983 Nissan first offered the 300ZX in Japan. It was introduced in the US one year later. All US-market 1984 model Nissan vehicles carried both Datsun and Nissan nameplates. Along with the arrival of their new flagship sports coupe, Nissan launched an aggressive marketing campaign to promote the brand name change from Datsun to Nissan. The 1984 Models can technically be considered the only year of the "Datsun 300ZX". The 1984 300ZX 50th Anniversary Edition was released in celebration of the company's 50th anniversary year. It was based on the standard 300ZX Turbo, but was outfitted with every luxury feature available, a unique black interior with "bodysonic" leather seats in addition to widened fender flares, requisite badging, rear quarter panel flares, and sixteen-inch (406 mm) wheels (400 mm).[5]

For the 1985 model year, Nissan dropped the Datsun name brand for good, but the car dealers were still known as Datsun dealers. Paul Newman raced in the 1985 GT1 Challenge and won. This was Newman's 4th national championship. Minor changes were made to the 300ZX including a water-cooled turbocharger, smoked taillights, and body-color bumpers.

The 1986 model saw wider flared wheel wells, and the rear quarter panels were designed specifically to accommodate factory ground effect style side skirts. 1986 turbo models were equipped with an ordinary hood, markedly losing the turbo "scoop" on the drivers side.

In order to keep up with quickly aging aesthetics, another slight redesign happened in 1987, consisting of new rounded, restyled and longer front and rear bumpers, new headlights, and new tail lights. The black trim on turbo models was now a charcoal instead of gloss black, and 1987 Turbo models came with special "smoked" turbo-finned wheels. All 1987 model year turbo cars also received an upgraded manual transmission, larger and more powerful brakes, and turbo cars produced from 4/87 and later came equipped with a clutch-type limited-slip differential.

For the 1988 models, there were again a few small changes. The turbocharger was switched from the Garrett T3 turbo to a lower-inertia T25 turbo, and the engine from 7.8:1 to an 8.3:1 compression ratio in order to reduce turbocharger spool time and provide instant boost at any usable RPM. The interior aluminum accents and chrome door handles that adorned the earlier cars were dropped in favor of matching color parts. Another special edition, the "Shiro Special" (SS), was released in 1988. It was only available in pearl white (shiro meaning "white" in Japanese). The SS package consisted of analog gauges and climate controls with a black interior, stiffer sway bars, stiffer springs, non-adjustable suspension, special seats (Recaro), a viscous-coupling limited slip differential, and a special front lower lip spoiler. This package had no options; all 88SS cars are identical.[6]

The 1989 Models are identical to 1988 models, though somewhat rare because of Nissan winding-down production early in preparation for the second generation 300ZX.

Ford Mustang (first generation)

Since it was introduced five months before the normal start of the production year and manufactured among 1964 Ford Falcons and 1964 Mercury Comets, the earliest Mustangs are widely referred to as the 1964 model.[9] A more accurate description is the "early 1965" model because it underwent significant changes at the beginning of the regular model year. All the early cars, however, were marketed by Ford as 1965 models. The low-end model hardtop used a 170 cu in (2.8 L) straight-6 engine and three-speed manual transmission and retailed for US$2,368.

Several changes to the Mustang occurred at the start of the normal 1965 model year production, five months after its introduction. These cars are known as "late 65's," and were built after factory retooling in August 1964. The engine lineup was changed, with a 200 cu in (3.3 L) engine that produced 120 hp (89 kW). Production of the 260 cu in (4.3 L) engine ceased when the 1964 model year ended. It was replaced with a new 200 hp (150 kW) 289 cu in (4.7 L) engine with a two-barrel carburetor as the base V8. A 225 hp (168 kW) four-barrel carbureted version was next in line, followed by the unchanged "Hi-Po" 271 hp (202 kW) 289. The DC electrical generator was replaced by a new AC alternator on all Fords (the quickest way to distinguish a 1964 from a 1965 is to see if the alternator light on the dash says "GEN" or "ALT"). The now-famous Mustang GT was introduced as the "GT Equipment Package" and included a V8 engine (most often the 225 hp (168 kW) 289), grille-mounted fog lamps, rocker panel stripes, and disc brakes. A four-barrel carbureted engine was now available with any body style. Additionally, reverse lights were an option added to the car in 1965. The Mustang was originally available as either a hardtop or convertible, but during the car's early design phases a fastback model was strongly considered. The Mustang 2+2 fastback made its inaugural debut with its swept-back rear glass and distinctive ventilation louvers.

The standard interior features of the 1965 Mustang included adjustable driver and passenger bucket seats, an AM radio, and a floor mounted shifter in a variety of color options. Ford added additional interior options during the 1965 model year. The Interior Decor Group was popularly known as "Pony Interior" due to the addition of embossed running ponies on the seat fronts, and also included integral armrests, woodgrain appliqué accents, and a round gauge cluster that would replace the standard Falcon instrumentation. Also available were sun visors, a (mechanical) remote-operated mirror, a floor console, and a bench seat. Ford later offered an under-dash air-conditioning unit, and discontinued the vinyl with cloth insert seat option, offered only in early 1965 models.

One option designed strictly for fun was the Rally-Pac. Introduced in 1963 after Ford's success at that year's Monte Carlo Rally and available on other Ford and Mercury compacts and intermediates, the Rally-Pac was a combination clock and tachometer mounted to the steering column. It was available as a factory ordered item for US$69.30. Installed by a dealer, the Rally-Pac cost US$75.95. Reproductions are presently available from any number of Mustang restoration parts sources.

The 1966 Mustang debuted with moderate trim changes including a new grille, side ornamentation, wheel covers and gas cap. An automatic transmission for the "Hi-Po," a large number of new paint and interior color options, an AM/eight-track sound system, and one of the first AM/FM monaural automobile radios were also offered. It also removed the Falcon instrument cluster; the previously optional features, including the round gauges and padded sun visors, became standard equipment. The Mustang convertible would be the best-selling in 1966, with 72,119 sold, beating the number two Impala by almost 2:1.[10]

The 1965 and 1966 Mustangs are differentiated by variations in the exterior, despite similar design. These variations include the emblem on the quarter-panels behind the doors. In 1965 the emblem was a single vertical piece of chrome, while in 1966 the emblem was smaller in height and had three horizontal bars extending from the design, resembling an "E". The front intake grilles and ornaments were also different. The 1965 front grille used a "honeycomb" pattern, while the 1966 version was a "slotted" style. While both model years used the "Horse and Corral" emblem on the grille, the 1965 had four bars extending from each side of the corral, while on the 1966, these bars were removed.

When Ford began selling the Mustang in Germany, they discovered a company had already registered the name. The German company offered to sell the rights for US$10,000. Ford refused and removed the Mustang badge, instead naming it T-5 for the German market.

Volkswagen Type 2 T1

The first generation of the Volkswagen Type 2 with the split windshield, informally called the Microbus, Splitscreen, or Splittie among modern fans, was produced from 8 March 1950 through the end of the 1967 model year. From 1950 to 1956, the T1 was built in Wolfsburg; from 1956 it was built at the completely new Transporter factory in Hanover. Like the Beetle, the first Transporters used the 1100 Volkswagen air cooled engine, an 1,131 cubic centimetres (69.0 cu in), DIN-rated 18 kilowatts (24 PS; 24 bhp), air-cooled flat-four cylinder 'boxer' engine mounted in the rear. This was upgraded to the 1200 - an 1,192 cubic centimetres (72.7 cu in) 22 kilowatts (30 PS; 30 bhp) in 1953. A higher compression ratio became standard in 1955; while an unusual early version of the 30 kilowatts (41 PS; 40 bhp) engine debuted exclusively on the Type 2 in 1959. This engine proved to be so uncharacteristically troublesome that Volkswagen recalled all 1959 Transporters and replaced the engines with an updated version of the 30 kW engine.[citation needed] Any 1959 models that retain that early engine today are true survivors. Since the engine was totally discontinued at the outset, no parts were ever made available.

The early versions of the T1 until 1955 were often called the T1a or "Barndoor", owing to the enormous rear engine cover, while the later versions with a slightly modified body (the roofline above the windshield is extended), smaller engine bay, and 15" roadwheels instead of the original 16" ones were called the T1b. From the 1964 model year, when the rear door was made wider (same as on the T2), the vehicle was referred to as the T1c. 1964 also saw the introduction of an optional sliding door for the passenger/cargo area instead of the outwardly hinged doors typical of cargo vans. This change arguably makes the 1964 Volkswagen the first true minivan, although the term wouldn't be coined for another two decades.[citation needed]

In 1962, a heavy-duty Transporter was introduced as a factory option. It featured a cargo capacity of 1,000 kilograms (2,205 lb) instead of the previous 750 kilograms (1,653 lb), smaller but wider 14" roadwheels, and a 1.5 litre, 31 kilowatts (42 PS; 42 bhp) DIN engine. This was so successful that only a year later, the 750 kg, 1.2 litre Transporter was discontinued. The 1963 model year introduced the 1500 engine - 1,493 cubic centimetres (91.1 cu in) as standard equipment to the US market at 38 kilowatts (52 PS; 51 bhp) DIN with an 83 millimetres (3.27 in) bore, 69 millimetres (2.72 in) stroke, and 7.8:1 compression ratio. When the Beetle received the 1.5 litre engine for the 1967 model year, its power was increased to 40 kilowatts (54 PS; 54 bhp) DIN.

German production stopped after the 1967 model year; however, the T1 still was made in Brazil until 1975, when it was modified with a 1968-79 T2-style front end, and big 1972-vintage taillights into the so-called "T1.5" and produced until 1996. The Brazilian T1s were not identical to the last German models (the T1.5 was locally produced in Brazil using the 1950s and 1960s-era stamping dies to cut down on retooling, alongside the Beetle/Fusca, where the pre-1965 body style was retained), though they sported some characteristic features of the T1a, such as the cargo doors and five-stud 205 millimetres (8.1 in) PCD) rims.

Among American enthusiasts, it is common to refer to the different models by the number of their windows. The basic Kombi or Bus is the 11-window (a.k.a. three-window bus because of three side windows) with a split windshield, two front cabin door windows, six rear side windows, and one rear window. The deluxe model featured eight rear side windows and two rear corner windows, making it the 15-window (not available in Europe). Meanwhile, the sunroof deluxe with its additional eight small skylight windows is, accordingly, the 23-window. From the 1964 model year, with its wider rear door, the rear corner windows were discontinued, making the latter two the 13-window and 21-window respectively. The 23- and later 21-window variants are usually described as Sambas.

Impala SS Fourth generation (1965–1970)

Totally redesigned in 1965, the Impala set an all-time industry annual sales record of more than 1 million units in the U.S., which has never been bettered. All new full-size Chevys eschewed the "X" frame for a full-width perimeter frame, a new body which featured curved, frameless side glass (for pillarless models), sharper angled windshield with newly-reshaped vent windows, and redesigned full-coil suspension. In 1965, Chevrolet introduced the Impala Caprice. Beginning with the four-door hardtop sedan body, Impala Caprices received unique upholstery, wood grained accents on the dashboard and specialty pulls on the insides of the doors. The Caprice Custom was reintroduced as the Chevrolet Caprice in 1966, taking the top position in the full-size Chevrolet lineup. The Impala would be the #2-selling convertible in the U.S. in 1966, with 38,000 sold; it was beaten by the Mustang by almost 2:1.[2] The Impala remained Chevrolet's top-selling model throughout the 1970s.

Engine choices included the inline six-cylinder as well as the famous Chevy small-block and big-block V8s. Automatic buyers were given the option of the newly-introduced three-range Turbo Hydra-Matic transmission for the newly-introduced Mark IV big-block engine, displacing 396 cubic inches. The old 409-cubic-inch (6.7 L) "W" engine was discontinued early in the 1965 model year, so early-production '65s got the 409, as well as 1/10th of 1% had the 396 CID big-block. Moreover, other later-built cars had the 396-cubic-inch (6.5 L) as the big-block option with significant horsepower drawback. Two-range Powerglide, as well as Synchro-Mesh 3- and 4-speed manual transmissions were available. As with previous years, Impalas featured more chrome trim inside and out, with pleated tufted upholstery and door panels.

The 1967 model was redesigned with enhanced Coke bottle styling. The curves were the most pronounced with the 1967-68 models. In keeping with federal regulations, safety features were built into Impalas during the 1967 and 1968 model years, including a fully collapsible energy-absorbing steering column, side marker lights, and shoulder belts for closed models. During the 1969 model year Impala production topped Caprice production by 611,000 units.

Right Hand Drive cars were manufactured in Canada for export to some countries such as Australia, UK, etc., until 1969. They used a version of the 1965 Impala dash panel until 1969. Australian models were assembled in Australia from kits as this lessened tax on the cars. A similar arrangement applied in New Zealand although the bodies were supplied from Canada already welded, painted and trimmed.