Totally redesigned in 1965, the Impala set an all-time industry annual sales record of more than 1 million units in the U.S., which has never been bettered. All new full-size Chevys eschewed the "X" frame for a full-width perimeter frame, a new body which featured curved, frameless side glass (for pillarless models), sharper angled windshield with newly-reshaped vent windows, and redesigned full-coil suspension. In 1965, Chevrolet introduced the Impala Caprice. Beginning with the four-door hardtop sedan body, Impala Caprices received unique upholstery, wood grained accents on the dashboard and specialty pulls on the insides of the doors. The Caprice Custom was reintroduced as the Chevrolet Caprice in 1966, taking the top position in the full-size Chevrolet lineup. The Impala would be the #2-selling convertible in the U.S. in 1966, with 38,000 sold; it was beaten by the Mustang by almost 2:1.[2] The Impala remained Chevrolet's top-selling model throughout the 1970s.
Engine choices included the inline six-cylinder as well as the famous Chevy small-block and big-block V8s. Automatic buyers were given the option of the newly-introduced three-range Turbo Hydra-Matic transmission for the newly-introduced Mark IV big-block engine, displacing 396 cubic inches. The old 409-cubic-inch (6.7 L) "W" engine was discontinued early in the 1965 model year, so early-production '65s got the 409, as well as 1/10th of 1% had the 396 CID big-block. Moreover, other later-built cars had the 396-cubic-inch (6.5 L) as the big-block option with significant horsepower drawback. Two-range Powerglide, as well as Synchro-Mesh 3- and 4-speed manual transmissions were available. As with previous years, Impalas featured more chrome trim inside and out, with pleated tufted upholstery and door panels.
The 1967 model was redesigned with enhanced Coke bottle styling. The curves were the most pronounced with the 1967-68 models. In keeping with federal regulations, safety features were built into Impalas during the 1967 and 1968 model years, including a fully collapsible energy-absorbing steering column, side marker lights, and shoulder belts for closed models. During the 1969 model year Impala production topped Caprice production by 611,000 units.
Right Hand Drive cars were manufactured in Canada for export to some countries such as Australia, UK, etc., until 1969. They used a version of the 1965 Impala dash panel until 1969. Australian models were assembled in Australia from kits as this lessened tax on the cars. A similar arrangement applied in New Zealand although the bodies were supplied from Canada already welded, painted and trimmed.
Engine choices included the inline six-cylinder as well as the famous Chevy small-block and big-block V8s. Automatic buyers were given the option of the newly-introduced three-range Turbo Hydra-Matic transmission for the newly-introduced Mark IV big-block engine, displacing 396 cubic inches. The old 409-cubic-inch (6.7 L) "W" engine was discontinued early in the 1965 model year, so early-production '65s got the 409, as well as 1/10th of 1% had the 396 CID big-block. Moreover, other later-built cars had the 396-cubic-inch (6.5 L) as the big-block option with significant horsepower drawback. Two-range Powerglide, as well as Synchro-Mesh 3- and 4-speed manual transmissions were available. As with previous years, Impalas featured more chrome trim inside and out, with pleated tufted upholstery and door panels.
The 1967 model was redesigned with enhanced Coke bottle styling. The curves were the most pronounced with the 1967-68 models. In keeping with federal regulations, safety features were built into Impalas during the 1967 and 1968 model years, including a fully collapsible energy-absorbing steering column, side marker lights, and shoulder belts for closed models. During the 1969 model year Impala production topped Caprice production by 611,000 units.
Right Hand Drive cars were manufactured in Canada for export to some countries such as Australia, UK, etc., until 1969. They used a version of the 1965 Impala dash panel until 1969. Australian models were assembled in Australia from kits as this lessened tax on the cars. A similar arrangement applied in New Zealand although the bodies were supplied from Canada already welded, painted and trimmed.
Posts
0 comments:
Post a Comment